PDA

View Full Version : Trolling motor



dick
June 30th, 2010, 02:20 PM
I am thinking of adding a bow trolling motor to my 21' Tidewater CC. Any opinions on which brand? My dealer recommended 80 lb. 60" shaft 24 volt. Both Minnkota and Motorguide seem to make a saltwater version. Should I let the dealer install? I think they quoted $1,100 installed from where I bought it-Sport Marine in Richmond.

Dick

Race1Mopar
June 30th, 2010, 03:06 PM
Mine is a 36volt on a 23' with just over 100ft lbs. My last one was a 86lb 24 volt on a 20" boat. Although both got the job done the 36 volt can troll longer and boat control is easier in slightly choppy water. Who knows... could be all in my head.

Hogie70
June 30th, 2010, 04:50 PM
I gotta 36 volt Great White 104 lbs. of thrust... Does a good yob for me... LOL

Wading mark
June 30th, 2010, 05:55 PM
Get a 36V if you can.

kenny
July 1st, 2010, 06:49 AM
I'd stick with the 85# 24 volt. It'll do the job and one less battery to buy and maintain......and Minn Kota 52".

45 ACP
July 2nd, 2010, 02:01 PM
Minn Kota over the Motorguide. Any boat over 20' I would recommend a 36v.

GGF
July 20th, 2010, 05:00 PM
I'd stick with the 85# 24 volt. It'll do the job and one less battery to buy and maintain......and Minn Kota 52".X2. Nothing wrong with a 36, but the 24 will do the job with that boat and it's cheaper to buy and maintain.

plugger
July 23rd, 2010, 09:47 AM
Yes to above. :)

speckledred
July 23rd, 2010, 02:32 PM
I use a MInn Kota 72" 85lb 24v on a 24ft Bay Stealth skiff witha 18" dead rise bow and works fine. A bit slower but works well.